99 Indoor Smoothing Compound
A maximum percentage of natural materials
Indoor use
ADVANTAGES
- No synthetic resins
- 500 times lower voc emissions than the a+ threshold
- Excellent application quality
- Excellent finish
TECHNICAL DEFINITION
Powder coating for indoor finishing work on walls and ceilings. Ensures top-quality surface preparation before painting or applying wall coverings.
Powder coating for indoor finishing work on walls and ceilings. Ensures top-quality surface preparation before painting or applying wall coverings.
TECHNICAL CHARACTERISTICS
- Ahdesion: Compliant with NF T 30 608
- Setting time: 4h
PACKAGING
5 and 15 kg bags
5 and 15 kg bags
COMPOSITION
99.9% raw materials of natural origin: natural plaster, marble powder, starch, gelatine.
Does not contain synthetic resin.
The paste obtained is cream coloured.
99.9% raw materials of natural origin: natural plaster, marble powder, starch, gelatine.
Does not contain synthetic resin.
The paste obtained is cream coloured.
SUITABLE SUBSTRATES
Indoor walls and ceilings : plasterboard, plaster blocks, concrete, cellular concrete, cement coating, plaster coating
Indoor walls and ceilings : plasterboard, plaster blocks, concrete, cellular concrete, cement coating, plaster coating
STORAGE
9 months in original, unopened packaging protected from damp.
9 months in original, unopened packaging protected from damp.
SUBSTRATE PREPARATION
The surfaces must comply with DTU 59.1, meaning they must be clean, dust-free, hard and free from any trace of release agent.
In surfaces are too uneven, apply a high-build filler beforehand.
Sand, brush and dust concrete, plaster blocks and plasterboard.
The surfaces must comply with DTU 59.1, meaning they must be clean, dust-free, hard and free from any trace of release agent.
In surfaces are too uneven, apply a high-build filler beforehand.
Sand, brush and dust concrete, plaster blocks and plasterboard.
MIXING RATIO
1 volume of water for every 2 1/ 3 volumes of powder. (Or 2.1 to 2.2 L of water per 5 kg bag and 6.2 to 6.6 L per 15 kg bag).
Preferably mix the paste using a mechanical mixer.
Leave the prepared paste to rest for 5 minutes and mix again.
1 volume of water for every 2 1/ 3 volumes of powder. (Or 2.1 to 2.2 L of water per 5 kg bag and 6.2 to 6.6 L per 15 kg bag).
Preferably mix the paste using a mechanical mixer.
Leave the prepared paste to rest for 5 minutes and mix again.
USE
Apply manually using a trowel, a spatula or a coating knife.
Leave to set and scrape off any imperfections before sanding, if necessary.
Apply a primer if satin or gloss paint is to be applied.
Application thickness: up to 2 mm per coat.
Apply manually using a trowel, a spatula or a coating knife.
Leave to set and scrape off any imperfections before sanding, if necessary.
Apply a primer if satin or gloss paint is to be applied.
Application thickness: up to 2 mm per coat.
DRYING TIME
12 to 24 hours depending on the thickness, the substrate and the ambient conditions.
12 to 24 hours depending on the thickness, the substrate and the ambient conditions.
CONSUMPTION
Approximately 250 to 400 g/m²
Approximately 250 to 400 g/m²
COVERING
Once the coating is fully dried, it can be covered with all types of paint, wallpaper paste or wall covering.
Once the coating is fully dried, it can be covered with all types of paint, wallpaper paste or wall covering.
PRÉCAUTIONS_DEMPLOI
The temperature during application and drying must be between +8 and +35°C.
Do not apply if the humidity level is >70%.
Do not apply to damp substrates.
Do not use mix that has started to set.
The temperature during application and drying must be between +8 and +35°C.
Do not apply if the humidity level is >70%.
Do not apply to damp substrates.
Do not use mix that has started to set.
Semin on
social media
