Expert Liss
Airless
Filling and smoothing coating
ADVANTAGES
- Strong filling power
- Controlled shrinkage
- Very good open time
- Very easy to sand
TECHNICAL DEFINITION
Airless filling and smoothing coating.
White finish, mat aspect, smoothed. Odourless.
Ideal for smoothing plaster, plaster blocks and plaster boards.
Airless filling and smoothing coating.
White finish, mat aspect, smoothed. Odourless.
Ideal for smoothing plaster, plaster blocks and plaster boards.
TECHNICAL CHARACTERISTICS
- Density : 1,73
- Dry extract : 71 %
COMPOSITION
Emulsion of acrylic resin, water, mineral filler, cellulose derivatives, preserving agent and various adjuvants.
The paste is white
Emulsion of acrylic resin, water, mineral filler, cellulose derivatives, preserving agent and various adjuvants.
The paste is white
SUITABLE SUBSTRATES
Plaster board, plaster blocks, plaster.
Plaster board, plaster blocks, plaster.
STORAGE
18 months frost-free and away from high heat in original unopened packaging.
18 months frost-free and away from high heat in original unopened packaging.
SUBSTRATE PREPARATION
The substrates must comply with the DTU 59.1 standard i.e. be dry, clean, hard, free of any trace of separating agent, etc.
The substrates must comply with the DTU 59.1 standard i.e. be dry, clean, hard, free of any trace of separating agent, etc.
USE
Expert’Liss is sprayed with any type of machine suitable for spraying coatings in 1 or 2 smoothed coats.
We recommend removing the filters and spraying at about 60 cm from the substrate.
Airless pump with stainless ball bearing (Ideal nozzles, 631 for smoothing or 635 to 651 according to the power of the machine used).
Expert’Liss is sprayed with any type of machine suitable for spraying coatings in 1 or 2 smoothed coats.
We recommend removing the filters and spraying at about 60 cm from the substrate.
Airless pump with stainless ball bearing (Ideal nozzles, 631 for smoothing or 635 to 651 according to the power of the machine used).
DRYING TIME
6 to 12 hours depending on the amount applied and according to the temperature, relative humidity and aeration of the room.
6 to 12 hours depending on the amount applied and according to the temperature, relative humidity and aeration of the room.
CONSUMPTION
Smoothing, skim coating, from 0.8 to 1.8 kg /m² per coat.
Smoothing, skim coating, from 0.8 to 1.8 kg /m² per coat.
COVERING
All types of coatings, paints and wall coverings.
All types of coatings, paints and wall coverings.
AVAILABLE DOCUMENTATION
DTU 59.1 & EN 16-566
DTU 59.1 & EN 16-566
PRÉCAUTIONS_DEMPLOI
Do not apply in temperatures < + 8°C and > +35°C and relative humidity > 70 %
Do not apply to overheated substrates
Do not apply to damp substrates
It is recommended you wear goggles when spraying as protection against any spillovers of small particles.
Do not apply in temperatures < + 8°C and > +35°C and relative humidity > 70 %
Do not apply to overheated substrates
Do not apply to damp substrates
It is recommended you wear goggles when spraying as protection against any spillovers of small particles.
Follow us 
