Repair & Finish pro
Powder filler for jointing of plasterboard
Interior
ADVANTAGES
- Minimal shrinkage
- Extra-fine product
- Setting time : 30 minutes
- Hight degree of whiteness
DESCRIPTION
Interior powder filler for jointing of plasterboards. Cracks, holes and dents of all sizes.
Interior powder filler for jointing of plasterboards. Cracks, holes and dents of all sizes.
TECHNICAL CHARACTERISTICS
- Ahdesion: AFNOR classification NFT 36.005 Family lll
PACKAGING
5 and 20 kg bags on a covered pallet.
5 and 20 kg bags on a covered pallet.
COMPOSITION
Compound in powder form, composed of plaster, calcium carbonate, mineral filler, cellulose, and various adjuvants. The resulting paste is white.
Compound in powder form, composed of plaster, calcium carbonate, mineral filler, cellulose, and various adjuvants. The resulting paste is white.
USE :
They must comply with DTU 59.1, i.e. be clean, dry, sound, hard, dust-free and free of any trace of formwork oil. Correctly open up cracks.
They must comply with DTU 59.1, i.e. be clean, dry, sound, hard, dust-free and free of any trace of formwork oil. Correctly open up cracks.
SUITABLE SUBSTRATES
All types of unworked or painted interior substrates: Plaster, plaster boards, plaster bricks, concrete, ce- ment coatings, concrete blocks, aerated concrete, bricks, terracotta, etc.
All types of unworked or painted interior substrates: Plaster, plaster boards, plaster bricks, concrete, ce- ment coatings, concrete blocks, aerated concrete, bricks, terracotta, etc.
STORAGE
9 months in original, unopened packaging in a dry place.
9 months in original, unopened packaging in a dry place.
SUBSTRATE PREPARATION
They must comply with DTU 59.1, i.e. be clean, dry, sound, hard, dust-free and free of any trace of formwork oil.
Correctly open up cracks
They must comply with DTU 59.1, i.e. be clean, dry, sound, hard, dust-free and free of any trace of formwork oil.
Correctly open up cracks
MIXING RATIO
2,75 litres of water per 5 kg bag.
11 litres of water per 20 kg bag.
2 volumes of powder for 1 volume of water.
2,75 litres of water per 5 kg bag.
11 litres of water per 20 kg bag.
2 volumes of powder for 1 volume of water.
USE
Application is with a plaster knife.
• 2,75 litres of water per 5 kg bag.
• 11 litres of water per 20 kg bag
• 2 volumes of powder for 1 volume of water.
Application is with a plaster knife.
• 2,75 litres of water per 5 kg bag.
• 11 litres of water per 20 kg bag
• 2 volumes of powder for 1 volume of water.
APPLICATION TIP
Application is with a plaster knife.
Application is with a plaster knife.
DRYING TIME
It depends on the ambient conditions, the type of substrate and the thickness of application.
As a general rule, for 1 cm of thickness, SEMIN REPAIR & FINISH PRO will dry in 6 hours.
It depends on the ambient conditions, the type of substrate and the thickness of application.
As a general rule, for 1 cm of thickness, SEMIN REPAIR & FINISH PRO will dry in 6 hours.
CONSUMPTION
1 kg/m2/mm of thickness.
Fort jointing of plasterboards: 400 g/m2/mm.
1 kg/m2/mm of thickness.
Fort jointing of plasterboards: 400 g/m2/mm.
PRÉCAUTIONS_DEMPLOI
The temperature on application and during drying must be between 8 and 35°C. Do not use on a damp substrate. Do not use paste that has begun to set.
The temperature on application and during drying must be between 8 and 35°C. Do not use on a damp substrate. Do not use paste that has begun to set.
Follow us 
