Sem-Light Outdoor
Exterior lightweight
Filler
ADVANTAGES
- Easy to use
- Quick drying
- Fills all thicknesses
TECHNICAL DEFINITION
Lightweight paste for all repair work on external walls.
Non-shrink and fast drying, it is very easy to use for high-quality filling tasks.
Lightweight paste for all repair work on external walls.
Non-shrink and fast drying, it is very easy to use for high-quality filling tasks.
TECHNICAL CHARACTERISTICS
- Ahdesion: >0.8 MPa in compliance with EN 16566
- Density : 0,8 kg/L
PACKAGING
1 litre and 5 litre buckets
1 litre and 5 litre buckets
COMPOSITION
Emulsion resin, lightening agent, calcium carbonate and various additives.
The resulting paste is off-white in colour.
Emulsion resin, lightening agent, calcium carbonate and various additives.
The resulting paste is off-white in colour.
SUITABLE SUBSTRATES
Exterior walls: • Painted façades. • Masonry. • Rendering. • Brick. • Stone. • Aerated concrete. • Concrete. • Cement coating.
Exterior walls: • Painted façades. • Masonry. • Rendering. • Brick. • Stone. • Aerated concrete. • Concrete. • Cement coating.
STORAGE
12 months in original, unopened packaging, protectedfrom frost and high temperatures.
12 months in original, unopened packaging, protectedfrom frost and high temperatures.
SUBSTRATE PREPARATION
Substrates must comply with DTUs, i.e. be clean, dry,hard, cohesive, sound, dust-free and free of any traceof formwork oil.
Correctly open up cracks.
Substrates must comply with DTUs, i.e. be clean, dry,hard, cohesive, sound, dust-free and free of any traceof formwork oil.
Correctly open up cracks.
USE
Apply with a filler knife or spatula.
Clean tools with a dry cloth or with water if necessary.
Apply with a filler knife or spatula.
Clean tools with a dry cloth or with water if necessary.
DRYING TIME
Depends on the substrate, weather conditions and applicationthickness.
Painting is possible 2 hours after application if filling microcracksand using water-based paint (wait 24 hoursfor acrylic paint).
Depends on the substrate, weather conditions and applicationthickness.
Painting is possible 2 hours after application if filling microcracksand using water-based paint (wait 24 hoursfor acrylic paint).
CONSUMPTION
Approximately 0.8 kg/m²/mm of thickness.
Approximately 0.8 kg/m²/mm of thickness.
COVERING
Once the filler is completely dry, it can be covered with all types of coating and paint.
Once the filler is completely dry, it can be covered with all types of coating and paint.
AVAILABLE DOCUMENTATION
NFT 30-608 and EN 16566: Painting fillers for internaland/or external work.
DTU 59.1: Building painting work.
NFT 30-608 and EN 16566: Painting fillers for internaland/or external work.
DTU 59.1: Building painting work.
PRÉCAUTIONS_DEMPLOI
The temperature on application and during dryingmust be between +5°C and +35°C.
Do not apply at a humidity level above 80%.
Do not apply to damp substrates.
Not suitable for use on plastic or metal.
Do not inhale dust if sanding.
The temperature on application and during dryingmust be between +5°C and +35°C.
Do not apply at a humidity level above 80%.
Do not apply to damp substrates.
Not suitable for use on plastic or metal.
Do not inhale dust if sanding.
Follow us 
